ATS型高压螺杆泵 
 ATS-type high-pressure Screw Pump
 
 
 
 
一、ATS高压螺杆泵
     ATS-type high-pressure Screw Pump
     ATS泵为三螺杆结构，螺杆的制造精度非常高，同时具备高度的耐磨特性。陶瓷内壳增加了泵的抗磨性和耐用性。在运行过程中，泵的振动和噪声非常小，
     ATS pump for the three-screw structure, the screw manufacturing precision is very high, while a high degree of wear-resistance characteristics.
    , the pump vibration and noise is very small,
     对温度变化的稳定性极强。配备不同的选项，可以进一步增加泵的耐用性。该泵可以直接浸没在冷却润滑液中，也可以安装在冷却液箱外，是用于输送润滑和非研磨介质的自吸式定量容积式泵。
    , 
     lubricating fluid can also be installed in the coolant tank, is used to transport lubricating and non-grinding media, self-priming quantitative displacement pump.
 
 
 
 
二、性能参数
     technical data
     1、流量: 1-1000升/分钟
        Flow: 1-1000 l/min 
     2、工作压力：1-16 Mpa
        Working pressure: 1-16 Mpa 
     3、入口压力：  2 Mpa
        Inlet pressure: Max2 Mpa 
     4、工作温度：  130 ℃
        Working temperature: Max130 ℃
     5、运动粘度：1-2500 mm?/s
        Kinematic viscosity: 1-2500 mm?/s
 
 
三、优点
     Advantages
     1、复合陶瓷材料带来的高耐磨性，由此获得的革命性的长寿命
        Composite ceramic materials to bring high wear resistance, thus gaining a revolutionary long life
     2、较小的振动
        Smaller vibration
     3、高温度稳定性
        High temperature stability    
     4、低噪音
        Low noise    
     5、稳定平缓地输送液体
        Stable and smooth delivery of liquid
     6、压力范围广，性能曲线平滑
        The pressure range is wide and the performance curve is smooth
     7、结构设计紧凑，高效率
        Compact structure, high efficiency
     8、坚固，不易污染
        Sturdy, difficult to contaminate  
     9、控制部件和冷却润滑剂分离
        The control part is separated from the cooling lubricant
    10、管道中无压力冲击
        No pressure shock in the pipe
 
 
四、应用
     Application
 
 
    ATS高压机床冷却泵应用于数控加工中心机床的冷却润滑剂（机 械油、乳化液、皂化液、冷却油、磨削液、铣削液等输送循环和冷却冲洗。典型应用在钻铣加工时
     ATS high-pressure machine tool cooling pump used in CNC machining center machine tools (mechanical oil, emulsion, saponification solution, 
     cooling oil, grinding fluid, milling fluid circulation and cooling rinse,
     对带内部冷却润滑剂输送的刀具井下冷却和润滑并冲洗和输送碎屑。用来提高加工速度效率和工件的表面光洁度和零件加工精度。我们的产品可以服务和应用于国
     
    
     际机床研发生产制造商：DMG、HELLER、GROB、MAKINO、JUNKER、STAMA、EXCELLO、CHIRON、GARDNER、YAMAZAKIMAZAK、GILDEMEISTER、TRUMPF、AMADA、OKUMA、MAG、STARRAGHECKERT、
     R & D and production of well-known machine tool manufacturer:DMG, HELLER, GROB, MAKINO, JUNKER, STAMA, EXCELLO, CHIRON, GARDNER, YAMAZAKIMAZAK, GILDEMEISTER, TRUMPF, AMADA, OKUMA, MAG, STARRAGHECKERT,
     HOLLER HILLE装备所有泵分为用于垂直浸没式安装（通常在油箱容器中）的浸没式规格（T型）和用于水平外部干燥安装的底脚卧式或悬挂于油箱侧壁的安装形式（F型）。
     HOLLER HILLE EQUIPMENT All pumps are divided into submersible type (T type) for vertical submerged installation (usually in the tank container) 
     and feet for horizontal external dry installation or suspended from tank side wall F type).
 
 
五、常规ATS型高压螺杆泵型号
     Conventional ATS high-pressure screw pump model
     ATS 20-30-T-G
     ATS 20-40-T-G
     ATS 20-48-T-G
     ATS 25-38-T-G
     ATS 25-50-T-G
     ATS 25-60-T-G
     ATS 32-48-T-G
     ATS 32-64-T-G
     ATS 32-76-T-G
     ATS 40-60-T-G
     ATS 40-80-T-G
     ATS 40-96-T-G
     ATS 50-74-T-G
     ATS 50-100-T-G
     ATS 50-120-T-G
     ATS 60-90-T-G
     ATS 60-120-T-G
     ATS 60-145-T-G
 
 
六、ATS型高压螺杆泵关键词
     ATS-type high-pressure screw pump Key words
     三螺杆泵、高压螺杆泵、高压机床冷却泵、自动排屑器、冷却液过滤器、集中式冷却液过滤系统。
     Three screw pump, high pressure screw pump, high pressure machine cooling pump, automatic 
     chip conveyor, coolant filter, centralized cooling liquid filtration system.
 
 

 七、ATS型高压螺杆泵样本资料下载：
     ATS-type high pressure screw pump sample information download:
 
 
八、关于ATS型高压螺杆泵组选型配置须知及使用开机注意事项的重要说明：（供设计院和现场安装使用维护人员参考）
     ATS-type high-pressure screw pump on the selection of configuration notes and the use of the boot note 
     of important note: (for the Design Institute and on-site installation and maintenance personnel reference)
     泵由四个关键组件构成：
     The pump consists of four key components:
     1、简洁设计的吸油进油口
        simple design of the oil inlet
     2、复合陶瓷内衬
        composite ceramic lining
     3、硬化钢螺杆付：一根驱动轴和两根同步旋转运行的轴
        hardened steel screw pay: a drive shaft and two synchronous rotation of the shaft 
     4、带节流点、迷宫式密封腔轴和外置轴承的承压外壳（轴承密封座）。壳体由两个嵌入钢外壳中的 复合陶瓷内衬合并构成，轴套件由特殊热处理的工具钢制成。
        with a throttle point, labyrinth seal shaft and external bearing bearing shell (bearing seal seat). The housing consists of two composite 
        ceramic linings embedded in a steel housing made of specially heat treated tool steel.
 
 
九、联络及声明：本网页内容、图片、文字、数据、格式、参数、技术和版权属南京艾科泵业有限公司所有，禁止以任何方式的分解剪切下载复制以用作任何的商业盈利用途。
     Contact and Disclaimer: The content, images, text, data, format, parameters, technology and copyrights of this web site are the property of 
     Nanjing Aike Screw Pumps Co.,.
 
     如有需要提供ATS型高压螺杆泵的其他内容，请联系您的销售经理或售服人员：
     If you need to provide other types of ATS-type high-pressure screw pump, please contact your sales manager or sales staff: