150W 强劲功率，回热速度非常迅速，可以使用较低焊接温度，减低热冲击对组件及焊咀的影响。
 
对应高熔点之焊接，适用于焊接电源线，多层电路板，散热器，屏蔽外壳等需要大热容量之作业，或焊接微型组件密集之多层电路板。
 
设有高功率模式，需要进行大热容量之作业时，可将焊台调至高功率模式来强化焊接效率。
 
预设温度模式，可以在预设温度模式输入三个经常使用的焊接温度，只需按一下按钮，即可取用预设温度
 
焊台 高设定温度为500C，可以解决过往因为热量不足而引发的焊接问题
 
当温度低于 低 报范围时，焊台会响起 报信号。
 
设有自动休眠及自动关机功能，能有效减少焊咀氧化。
 
当使用高功率模式时，焊咀温度可能会波动，只适用于短时间操作。
 
 
 
T20烙铁头简介
 
T20烙铁头,是日本白光公司推出的FX-838拆消静电电焊台标配的烙铁头型号名称。
 
T20烙铁头属复合型焊咀,是发热芯、温度传感器、烙铁头三个部件的复合体,又称T20焊咀。
 
T20烙铁头的特点是：传感器充分前置,对温度变化敏感度高。
 
 
 
T20烙铁头基本性能及特点
 
1.适用于白光FX-838电焊台；
 
3.使用温度在400度（正负20度）能达到50000焊点；
 
4.上下锡流畅；
 
5.复合式焊咀与发热芯二合一设计，够快够热，无论焊点大小或焊接，均能应付自如。 
 
 
 
T20烙铁头常规型号
 
T20-B,T20-BC2,T20-BC3 ,T20-BC4,T20-C5,T20-C6,T20-D16,T20-D24,T20-D32,T20-D6,T20-K,T20-KU,T20-BL,T20-BL2,T20-BL3
 
各规格型号烙铁头应用范围
 
B型（圆锥型/尖咀）
 
特    点： B型烙铁头无方向性，整个烙铁头前端均可进行焊接。
 
应用范围： 适合一般焊接，无论大小之焊点，也可使用B型烙铁头。
 
 
 
K型 （刀头）
 
特    点：使用刀形部份焊接，竖立式或拉焊式焊接均可，属于多用途烙铁头。
 
应用范围： 适用于SOJ, PLCC, SOP, QFP，电源,接地部份元件，修正锡桥，连接器等焊接。
 
 
 
I型（尖咀）
 
特    点：烙铁头幼细。
 
应用范围： 适合精细之焊接，或焊接空间狭小之情况，也可以修正焊接芯片时产生之锡桥。
 
 
 
D型（平头/一字批咀型）
 
扁型包括D16,D24,,D4,D6等
 
特    点：用批咀部份进行焊接。
 
应用范围：适合需要多锡量之焊接，例如焊接面积大、粗端子、焊垫大的焊接环境。
 
 
 
BC型（马蹄型/斜切圆柱型）
 
马蹄型包括BC2、BC3、  C C6等
 
特    点： 用烙铁头前端斜面部份进行焊接，适合需要多锡量之焊接。
 
应用范围： Ｃ型烙铁头应用范围与D型烙铁头相似，例如焊接面积大，粗端子，焊垫大的情况适用。
 
BC2,BC3型烙铁头，适合焊接电阻，二极管之类的元件，齿距较大之SOP 及QFP 也可以使用。
 
  ,C6适用于粗大之端子，电路板上之接地。电源部份等需要较大热量之焊接场合。
 
 
 
HAKKO f T20 soldering iron head
 
T20 soldering iron head is the model and name of the soldering iron head standard for fx-838 electrostatic removal welding platform launched by Japan Baiguang company.
 
T20 tip is a composite tip, which is a combination of heating core, temperature sensor and tip, also known as T20 tip.
 
The characteristic of T20 soldering iron head is that the sensor is fully pre positioned and highly sensitive to temperature change.
 
Basic properties and characteristics of T20 iron head
 
-838 welding platform;
 
, environmental friendly, Roh compliant, with report
 
50000 solder joints at 400 ℃ (plus or minus 20 ℃);
 
;
 
, fast and hot enough, and can handle the welding freely no matter the size of welding spot or lead-free welding.  
 
T20 soldering iron head regular model
 
T20-B,T20-BC2,T20-BC3 ,T20-BC4,T20-C5,T20-C6,T20-D16,T20-D24,T20-D32,T20-D6,T20-K,T20-KU,T20-BL,T20-BL2,T20-BL3
 
Application scope of soldering iron head of various specifications and models
 
Type B (cone / tip)
 
Special point: B-type iron head has no directionality, and the front end of the whole iron head can be welded.
 
Scope of application: suitable for general welding, regardless of the size of the solder joints, can also use B-type iron head.
 
Type K (cutter head)
 
Special point: it can be welded by knife shaped part,-purpose soldering iron head.
 
Application: suitable for welding SOJ, PLCC, SOP, QFP, power supply, grounding parts, modified tin bridge, connector, etc.
 
Type I (tip)
 
Special point: the tip of the iron head is fine.
 
Application scope:.
 
Type D (flat / slotted)
 
Flat type includes D16, D24, D4, D6, etc
 
Special point: use the nozzle part for welding.
 
Scope of application: suitable for welding requiring more tin, such as welding environment with large welding area, thick terminal and large welding pad.
 
Type BC (horseshoe / chamfered cylinder)
 
Horseshoe type includes BC2, BC3, C4C C6, etc
 
Special point: use the bevel part of the front end of the iron head for welding, which is suitable for welding with more tin.
 
Application scope: the application scope of type C soldering iron head is similar to that of type D soldering iron head, for example, the case of large welding area, thick terminal and large welding pad is applicable.
 
BC2, BC3 soldering iron head, suitable for welding resistor, diode and other components, SOP and QFP with large pitch can also be used.
 
.