视频
图片
锥形量热仪GB/T16172-2007
价格
面议
订货量
≥1
最小起订量
1 台
供货总量
100台
产地
广东省/东莞市
发货期
自买家付款之日起15天内发货
东莞市大显自动化仪器设备有限公司

东莞市大显自动化仪器设备有限公司

百销通高级版 身份认证
主营产品:
高压漏电起痕试验机,电压击穿试验机,锥形量热仪,铺地材料试验机,建筑构件耐火试验炉,建材单体燃烧试验机,UL790屋顶材料火灾试验机,建筑材料难燃性试验机,门卷帘耐火试验机,绝热材料最高使用温度,交直流电晕老化试验机,开放式碳弧灯试验箱
- 产品参数 -
商标 大显
型号 Dx8348A
包装 标准木箱
产量 10
是否有现货
品牌 大显
加工定制
类型 其它
用途 用于建筑材料热释放速率
油缸位置
控制方式 计算机控制
外形尺寸 高2000*长1600*宽700mm
重量 480kg
产品用途 用于建筑材料
型号 Dx8348A
商标 大显
包装 标准木箱
- 产品详情 -
锥形量热仪GB/T16172-2007基本介绍
锥形量热仪符合GB/T16172-2007《建筑材料热释放速率试验方法》,规定了采用外部点火器,试样在水平定位受到可控制等级的热辐射时,测定热释放速率的方法。热释放速率的测量是通过燃烧产物气流中氧气浓度计算出的氧消耗量和燃烧产物的流量来确定的,同时也对试样引燃(持续有焰燃烧)时间进行了测量
The cone calorimeter provides a method for determining the rate of heat release when a sample is horizontally positioned to receive a controllable level of heat radiation using an external measurement of the heat release rate is determined by the oxygen consumption calculated from the oxygen concentration in the gas flow of combustion products and the flow rate of combustion products.
锥形量热仪GB/T16172-2007性能特点
符合GB/T16172-2007《建筑材料热释放速率试验方法》 及 ISO5660-1:2002《Test me thod for heat release rate of building materials》标准规定测试方式。
锥形量热仪GB/T16172-2007技术参数

1、辐射锥:加热功率:5Kv,辐射强度:100Kw/m2,配有三个热电偶测量温度。

2、排气系统:由离心风机、集烟罩、风机的进气和排烟管道以及孔板流量计组成

3、排气量:0.012m3/s~0.035m3/s(可调)

4、计时值分辨率:1S   误差<1s/n

5、氧气分析仪:西门子順磁分析仪,02测量范围:0-25%

6、配备采样泵及烟尘过滤器。

7、燃气流量采用进口 流量控制器

8、点火电压:220V,双电极,保证试验时的安全性。

9、排烟流量:排烟风机采用变频控制,可实现排烟流量在0.012m3/s~0.035 m3/s自动调节。

10、控制系统:采用Detection控制程序及ZWH4500  采集控制卡,可实现自动数据采集和处理、数据保存和输出测定结果。

11、设备采用手动及自动两种方式控制,可切换到手动方式进行操作。

12、设备配有万向脚轮,方便用户移动设备。

13、排气系统: 采用变频风机控制排气流量,通过微机实现自动控制;一体化孔板流量计测量排气流量,使排气流量 度高。

14、称重装置:采用高精度的称重传感器,响应时间快,称重精度达到0.1g,分辨率为0.01g

15、进口隔膜泵,流量率:33L/min,真空度:700 ㎜Hg,压力:2.5 bar。

16、进口烟尘过滤器滤头为固体PTFE组成,内部为0.5umPTFE过滤材料。

17、进口水分过滤器滤头为固体PTFE组成,底部液体可通过蠕动泵排。

18、进口泰康压缩机式冷凝器,冷却容量320kJ/h,露点稳定度0.1度,露点静态变化0.1K,保护等级IP20。

19、仪器控制系统:采用计算机控制和数据处理计算机测控系统主要由测控软件、硬件及计算机、打印机等组成。

20、测量控制软件:可在Windows多种操作系统下工作,试验数据采用数据库管理方式,完成实验的数据采集和处理、数据保存和输出测定结果并自动保存所有试验数据;

21、提供多种报表打印接口,用户可根据需要编辑任何格式的报表,并打印输出;

21、软件包还包含其他工具软件,如调试工具箱、批量处理程序等; 

23、进口水分过滤器滤头为固体PTFE组成,底部液体可通过蠕动泵排。

24、进口泰康压缩机式冷凝器,冷却容量320kJ/h,露点稳定度0.1度,露点静态变化0.1K,保护等级IP20。

25、仪器控制系统:采用计算机控制和数据处理计算机测控系统主要由测控软件、硬件及计算机、打印机等组成。

26、测量控制软件:可在Windows多种操作系统下工作,试验数据采用数据库管理方式,完成实验的数据采集和处理、数据保存和输出测定结果并自动保存所有试验数据;

27、提供多种报表打印接口,用户可根据需要编辑任何格式的报表,并打印输出;

28、软件包还包含其他工具软件,如调试工具箱、批量处理程序等; 

29、设备附件及技术资料

30、完整的仪器配置, 220V/16A (3000W )5米电源线24孔6位插座带漏电保护插排3个。

31、与仪器配套的完整资料(说明书、维护手册、安装条件说明、仪器出厂检测报告等)1套。

32、外形尺寸:高2000mm*长1600mm*宽700mm

33、重量:480kg

Main performance parameters:
cone: heating power 5kw, radiation intensity: 100kw/m2, with three thermocouples to measure the temperature.
: imported high-precision electronic balance, weighing 500g, resolution 0.01g
: 100mm*100mm*50mm or more
: the exhaust system is composed of centrifugal fan, smoke collection hood, air intake and exhaust pipe of fan and orifice flowmeter
: 0.012m3/s~0.035m3/s(adjustable)
: sampling pump, smoke filter, wet and cold well removal, bypass coefficient of emptying, water filter, CO2 filter.
.
8, with embedded computer and 8.4 inch LCD, with TCP/IP and rs-232 communication interface options
:

Measurement range 0-25%
Signal output 4-20MA
Response time T90 ≤ 2S
Ambient temperature 0-45 ?C
Relative humidity <90% (no condensation)
Linearity < ±  0.1% O2
Zero drift 0.05% O2 (per week)
Repeatability <  0.02% O2
(CO2) :
Measurement range 0-10%
Repeatability < ± 1%
Zero drift ≤2% per week
Range drift ≤2% per week
Linear deviation <± 1%

, carbon monoxide concentration, temperature, heat release rate and mass loss rate.
Radiation cone: radiation cone power is 5KW;Can provide up to 100 kw / in sample surface radiation intensity of illumination;Made of aerospace and cutting-edge materials, it is the range of 50mm x 50mm at the center of the sample, the radiance should be uniform with a deviation of less than ± 2%.

辐射锥试验装置.jpg

锥形量热仪GB/T16172-2007使用说明

工作原理:

热释放速率试验机试验方法建立在观测基础上,一般来说,净燃烧热和燃烧所消耗的氧气质量成比例。这个关系是每消耗1kg的氧气释放出的热量大约为13.10×10?kJ.在环境大气条件下,将试样置于规定的0kw/㎡~100kw/㎡的外部热辐射条件下,测量其燃烧时氧气浓度和排气流量。
本试验方法是通过有代表性的小试样,来评估试验制品对火反应时的热释放速率特性。

, the net heat of combustion is proportional to the mass of oxygen consumed by relation is that the heat released per consumption of 1kg of oxygen is approximately 13.10×, the sample is placed under the specified external thermal radiation conditions of 0kw/㎡~100kw/㎡ to measure the oxygen concentration and exhaust flow during combustion.

This test method is to evaluate the heat release rate characteristics of test products in response to fire through representative small samples.

控制_

 

您还可以搜索
朋友圈二位码

长按二维码,保存至相册。
发送给微信好友。