3D飞织鞋面压光机，针对平织、针织裁片之粘合，对横机领、下兰、起皱面料、松紧带、织带、鞋材等材料的缩水、烘干、压光定型。
 
功能特点：
 
1、自动冷却装置：配备定时自动冷却停机开关系统。
 
2、加热温度均匀：专业器件智能控制温差至 ，加热区温差不大于±5℃。
 
3、不限物体长度：连续式粘合、压光定型不受物体长度。
 
4、皮带自动修正：配有进口微动omron开关，排除皮带偏离，确保皮带使用寿命。
 
5、冷却快定型佳：配备3200转/分冷却风扇及网带输送系统，冷却速度快，布料压光粘合定型效果好。
 
6、胶辊压力稳定：在胶带宽度范围内压力均匀上下橡胶 直径为850MM。
 
技术参数：
 
电源（V）Power supply:380V
 功率（Kw）power:12KW
 加压方式Pressurized  motion:辊式Roller   Type
 压光粘合温度Temperature  bonding:0-200℃
 压光粘合宽度Width  for  bonding:1200/1500/1800/2000mm
 体积Volume:2650*1500*1500 
 
bujiali 3D flying weaving shoe upper calender is designed for the adhesion of flat and knitted pieces, and for the shrinkage, drying, and calendering of materials such as flat collar, lower flange, wrinkled fabric, elastic band, webbing, and shoe materials.
 
Functional features:
 
: equipped with a timed automatic cooling shutdown switch system.
 
: Professional devices intelligently control the temperature difference to within ± 5 ℃ of the heating zone.
 
: Continuous bonding, calendering and shaping are not affected by t     ngth of the object.
 
: Equipped with imported micro omron switch to eliminate belt deviation and ensure belt service life.
 
: Equipped with a 3200 rpm cooling fan and mesh belt conveyor system, the cooling speed is fast, and the fabric is well pressed and bonded for shaping.
 
: The pressure is uniform within the width range of the tape, and the rubber diameter is 850mm.
 
Technical parameters:
 
Power supply: 380V
 
Power: 12KW
 
Pressurized motion: Roller Type
 
Temperature bonding: 0-200 ℃
 
Width for bonding: 1200/1500/1800/200mm
 
Volume: 2650 * 1500 * 1500