全 自 动 钨 钢 圆 棒 切 断 机 D F Q — 0 8 F 3
 
Automatic tungsten steel round rod cutter DFQ - 08F3
 
一 次 可 切 2~4 支 圆 棒
 
Can cut 4 round rods at a time
 
 
 
 
Quality   changes   everything.
 
特性简介 Characteristics
 
1.切割方式多样化：能实现一端平头、两端平头、等切和分切几种不同的切割方式，只需在界面上直接切换。 Diversified cutting methods: it can achieve several different cutting methods, such as flat head at one end, flat head at both ends,.
 
2.切割侦测功能：切割片能自动实时检测损耗，自动损耗补偿。Cutting detection function: cutting piece can automatically detect loss in real time, automatic loss compensation
 
 
 
3.  的推料机构：切段长度精度为±0.05mm，批量尺寸一致。Precise pushing mechanism: the cutting length accuracy is 0.05mm and the batch size is consistent
 
 
 
4.端面无缺口、掉角：压料为切口前后两段同时压料  No notch or dropping Angle on the end face: The pressing material is the pressing material at the same time before and after the cutting
 
5.压料机构：每根料有独立压头，压料稳固。Unique press material mechanism: each material has independent press head, press solid.
 
 
 
6.切料端面垂直：切断后端面垂直平整、光洁度高，无需二次磨削。The end face of cutting material is vertical: after cutting, the end face is vertical and smooth with high finish, without the need of secondary grinding.