联系人：汤灵珠   联系电话：13906181752
立体车库型材成型设备技术要求
2.1立体车库浪板/波浪板/载车板/边梁设备技术条件：
2.1.1设备占地面积： 28×3.5×5（长×宽×高）米。
2.1.2设备进料方向：左进右出。
2.1.3电压参数380，50Hz，3相。
2.1.4液压油：46#液压油。
2.1.5齿轮油：18#双曲线齿轮油。
2.2设备主要技术参数
2.2.1 轧制带钢宽度：≤500 mm
2.2.2 轧制带钢厚度：2.0~2.5mm
2.2.3 轧制带钢材质：低碳钢等
2.2.4 轧制工件长度：4000mm
2.2.5设备装机总容量：约30KW。
3.轧制产品范围
3.1 本冲压/成型机组，可以轧制厚度为2.0~2.5mm立体车库浪板。
要求：产品无明显扭曲现象；
      产品无明显的表面擦伤现象；
温馨提示：【江阴博世杰立体车库波浪板边梁成型设备】是由【江阴市博世杰科技有限公司】提供的，想了解更多关于【江阴博世杰立体车库波浪板边梁成型设备】的相关系信息，
请拨13906181752，联系人：汤灵珠
2.1 the three-dimensional garage floors of wave plate/wave plate/load/beam equipment technical conditions:
2.1.1 equipment area: 28 * 3.5 * 5 meters (length x width x height).
2.1.2 equipment feed direction: left to right.
2.1.3 voltage parameters for 380, 50 Hz, 3 phase.
2.1.4 hydraulic oil: 46 # hydraulic oil.
2.1.5 gear oil: 18 # hyperbolic gear oil.
2.2 equipment main technical parameters
2.2.1 rolling strip width: 500 mm or less
2.2.2 rolling strip steel thickness: 2.0 ~ 2.5 mm
2.2.3 rolling steel strip material: low carbon steel, etc
2.2.4 rolling workpiece length: 4000 mm
2.2.5 equipment installed gross capacity: 30 kw.

3.1 this stamping/molding unit, rolling thickness of 2.0 ~ 2.0 mm stereo garage can wave plate.
Requirement: the product has no obvious distortion phenomenon;
The surface of the product has no obvious scratch phenomenon;
Warm prompt: the jiangyin Bosch jie stereo garage wavy edge beam forming equipment 】 is provided by "jiangyin Bosch jie technology co., LTD.", want to learn more about the jiangyin Bosch jie stereo garage wavy edge beam forming equipment 】 the related information,
Please dial 13906181752, contact: Shang Lingzhu
了解更多关于立体车库波浪板设备情况 请与我们联系，
联系人：汤灵珠   联系电话：13906181752