负载阻抗/适用于EMtest BS 200Nx 电子开关
Highlights
- Verification load for electronic switch 0.6ohm / 50uH as per 7637-2:2004
- 28VDC
- 50A
- Additional shunt resistors 10ohm, 20ohm, 40ohm, 120ohm built-in for emission measurement
- Over-temperature protected
Application
CA BS 200N - Load Impedance for BS200Nx Electronic Switches
The switching behaviour of the BS 200N series semiconductor switches shall be verified on 0.6ohm to 50uH load inpedance. 200Nx are measured with the load connected. Additionally, the CA BS 200N includes a number of shunt resistors Rs such as 10ohm, 20ohm, 40ohm and 120ohm being required as per standards used during the emission measurement of transients as per 7637-2:2011 and the former 7637-2:2004.
标准
Verification Set-up
Verification of the BS 200N series switching characteristic
As per standard 7637-2 the electronic switch BS 200Nx is requested to meet a rise/fall time specification of 300ns +/-20% time parameters.
Wiring set-up
Set-up of CA BS 200N and BS 200Nx for verification
In order to properly verify the rise/fall time characteristic of the electronic switch (200N and BS 200N80)200N verification load (unit on t ft side in the below picture) and the BS 200Nx electronic switch (right side unit in the below picture) of 0.5m.
深圳市元锋科技有限公司
Shenzhen Yuan Feng Technology Co., Ltd
地址:深圳市宝安区宝安大道3016号富星通大厦701
联系人:杨先生
QQ:1980828546
电话:0139-26526199
手机:13926526199
邮箱:yf@
网址: